Expanders & Power Supplies
View the full specification of each product below:
4 Zone Expander
Product Code: SW-EXT
Description: 4 Zone Expander
4 Zone Expander
- Can be located up to 150m from panel
- All zones fully analysed
Technical details Mains:
- Quiescent Current: 20mA
- -10 to +40 degrees C (Class II)
- 50g
- 94mm x 55mm x 19mm
For use with SW8XX series
Contact us about this product
8 Zone Expander
Product Code: SW-EXT8
Description: 8 Zone Expander
8 Zone Expander
- Can be located up to 150m from panel
- All zones fully analysed
- 2 x 1Amp changeover relay outputs
- Available in 1.2mm steel box
Technical details Mains:
- Quiescent Current: 30mA
- Maximum Current: 80mA
- -10 to +40 degrees C (Class II)
- Circuit board only: 105g
- 95mm x 93mm x 20mm
- In metal box: 690g
- 195mm x 115mm x 44mm
For use with SW16120
Contact us about this product
8 Output Expander
Product Code: SW-OP8
Description: 8 Output Expander
8 Output Expander
- Can be located up to 200m from panel
- Up to 20 units per system using ID bus
- 8 x 1Amp changeover relay outputs
- Manual actuator & LED for each relay
- Available in 1.2mm steel box
Technical details Mains:
- EN 50131: Grade 2 Class II
- Quiescent Current: 2mA
- Maximum Current: 190mA
- Circuit board only: 90g
- 95mm x 93mm x 20mm
- In metal box: 670g
- 195mm x 115mm x 44mm
Contact us about this product
PSU 1 Amp
Product Code: PSU 1 Amp
Description: Power Supply: 1Amp / 12Vdc
1Amp/12Vdc Power Supply
For use on all HKC and many other panels
- Housing: 1.2mm mild steel
- 3 colour LED status indicators (Mains Fail / 12V OK / Fuse Fault)
- Cabinet can house 2 x 8-Zone Expanders or 4/8 Channel Dialler
EN Version has additional:
- Addressable (ID Bus)
- Automatically Monitored
- 2 Programmable Relay Outputs
- Deep Discharge Protection
- EN50131-6 (Grade 2)
Technical details Mains:
- Mains: 230Vac+/-10%, 50Hz
- Out: 1A total @ 13.7Vdc +/-5%
- -10 to +40 degrees C (Class II)
- Weight: 3,300g
- Size: 360mm x 236mm x 86mm
Contact us about this product
PSU 2 Amp
Product Code: PSU 2 Amp
Description: Power Supply: 2Amp / 12Vdc
2Amp / 12Vdc Power Supply
- Housing: 1.2mm mild steel
- Addressable (ID Bus)
- Automatically Monitored
- 2 Programmable Relay Outputs
- Deep Discharge Protection
- 3 colour LED status indicators (Mains Fail / 12V OK / Fuse Fault)
- Cabinet can house 2 x 8-Zone Expanders or 4/8 Channel Dialler
- EN50131-6 (Grade 2)
Technical details Mains:
- Mains: 230Vac+/-10%, 50Hz
- Out: 2A total @ 13.7Vdc +/-5%
- -10 to +40 degrees C (Class II)
- Weight: 3,900g
- Size: 360mm x 236mm x 86mm
Contact us about this product
Take control of your HKC intruder alarm
Take control of your HKC intruder alarm using the HKC app, available for Apple, Android and Windows Smartphones. Customers can use the app to remotely control a compatible HKC intruder alarm system.
read moreRequest a Quote
Contact us for a free survey and quotation on 086 810 61 54 or you can email us at info@deadysecurity.ie or fill out our enquiry form.
Customer Service
Trevor Deady will meet with each potential customer to discuss how Deady Security Systems can provide the perfect security system to fit all needs.
Address: Unit 7 Metro Business Park, Ballycurreen, Kinsale Road, Frankfield, Cork, Ireland Office: 086 810 61 54 Email: info@deadysecurity.ie
P.S.A. Licence No.: 00988 | M.S.C No.: A7-735-01 | All systems to is EN50131:1997
© Deady Security Systems. All Rights Reserved. Site by Barry Design